CCDP + Exams

CCDP Course + Exam Details

CCDP Certification

A Cisco Certified Design Professional (CCDP) can discuss, design, and create advanced addressing and routing, security, network management, data center, and IP multicast complex multi-layered enterprise architectures that include virtual private networking and wireless domains. With Logitrain you can ensure your success in professional career, as Logitrain has acquired certified and professional trainers.

CCDA certification is a pre-reqisite for Cisco Certified Design Professional (CCDP) certification.

The CCDP certification course covers various concepts such as implementing Scalable Routing Protocols, extending IP addresses – VLSM, describing OSPF in a Single Area, interconnect Multiple OSPF Areas, describing and configuring Enhanced IGRP, describing and configuring IS-IS, operating a Network Using Multiple Routing Protocols, optimising Routing Updates Operation, configuring DHCP, configuring Basic Border Gateway Protocol (BGP),
configuring Layer 3 Redundancy with HSRP and VRRP, implementing Wireless LANs, Wireless LAN Technology and Standards, configuring Switches to Support Voice over IP, understanding the Switch Security Issues and what not.

  • Training: get practical technical skills
  • Receive a certificate of course attendance
  • Small class size: increased instructor interaction
  • Authorised test centre: exams taken at our premises
  • More hands-on: 6 weeks remote lab access included
  • Expert trainers: imparting real world experience

Candidates can achieve this certification by passing following exam(s).

  1. Implementing Cisco IP Routing (ROUTE) – Exam 300-101
  2. Implementing Cisco IP Switched Networks (SWITCH) – Exam 300-115
  3. Designing Cisco Network Service Architecture (ARCH) – Exam 300-320

The certification exam if included in your course can be registered and attempted within 3 months of course/module completion at Logitrain training centre on weekdays during normal business hours (excludes public holidays)

  • Ciscopress: CCNP ROUTE Official Certification Guide
  • Ciscopress: CCNP SWITCH Official Certification Guide
  • Ciscopress: CCDP ARCH Official Certification Guide
  • Implement Scalable Routing Protocols
  • Extend IP addresses – VLSM
  • Describe OSPF in a Single Area
  • Interconnect Multiple OSPF Areas
  • Describe and Configure Enhanced IGRP
  • Describe and Configure IS-IS
  • Operate a Network Using Multiple Routing Protocols
  • Optimize Routing Updates Operation
  • Cisco IOS Features: Configure DHCP
  • Configure Basic Border Gateway Protocol (BGP)
  • Implement BGP In Scalable Networks
  • Implement IP Multicasting
  • Implement IPv6
  • Overview of the Campus Network
  • Configure VLANS and VTP
  • Implement Spanning Tree Protocol (STP)
  • Implement Rapid Spanning Tree Protocol (RSTP)
  • Implement Multiple Instance of Spanning Tree Protocol
  • Implement STP Security Mechanisms
  • Implement Multilayer Switching
  • Configure Layer 3 Redundancy with HSRP and VRRP
  • Implement Wireless LANs
  • Wireless LAN Technology and Standards
  • Configure Switches to Support Voice over IP
  • Understand Switch Security Issues
  • Design advanced core enterprise networks
  • Design campus Infrastructure using best practices
  • Design a High Availability enterprise network
  • Design a high availability WAN
  • Design network management services
  • Design IP multicast services
  • Describe enterprise VoWLAN design considerations
  • Design an enterprise data center
  • Design a high availability data center network that is modular, flexible and meets standards
  • Describe the components and technologies of a SAN network
  • Design an effective E-Commerce module
  • Design security services
  • Design engineers
  • Network consultants
  • System engineers
  • Individuals seeking CCDP and CCDE certification

Key Topics: Implementing Cisco IP Routing – ROUTE (300-101)

  •  Determine network resources needed for implementing EIGRP in a network
  • Create an EIGRP implementation plan
  • Create an EIGRP verification plan
  • Configure EIGRP routing
  • Verify an EIGRP solution was implemented properly using show and debug commands
  • Document the verification results for an EIGRP implementation
  • Determine network resources needed for implementing OSPF on a network
  • Create an OSPF implementation plan
  • Create an OSPF verification plan
  • Configure OSPF routing
  • Verify OSPF solution was implemented properly using show and debug commands
  • Document the verification results for an OSPF implementation plan
  • Determine network resources needed for implementing eBGP on a network
  • Create an eBGP implementation plan
  • Create an eBGP verification plan
  • Configure eBGP routing
  • Verify eBGP solution was implemented properly using show and debug commands
  • Document verification results for an eBGP implementation plan
  • Determine network resources needed for implementing IPv6 on a network
  • Create an IPv6 implementation plan
  • Create an IPv6 verification plan
  • Configure IPv6 routing
  • Configure IPv6 interoperation with IPv4
  • Verify IPv6 solution was implemented properly using show and debug commands
  • Document verification results for an IPv6 implementation plan
  • Create a redistribution implementation plan based upon the results from a redistribution analysis
  • Create a redistribution verification plan
  • Configure a redistribution solution
  • Verify that a redistribution was implemented
  • Document results of a redistribution implementation and verification plan
  • Identify the differences between implementing an IPv4 and IPv6 redistribution solution
  • Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis
  • Create a Layer 3 path control verification plan
  • Configure Layer 3 path control
  • Verify that a Layer 3 path control  was implemented
  • Document results of a Layer 3 path control implementation and verification plan
  • Implement basic teleworker and branch services
  • Describe broadband technologies
  • Configure basic broadband connections
  • Describe basic VPN technologies
  • Configure GRE
  • Describe branch access technologies

 

Key Topics: Implementing Cisco IP Switched Networks – SWITCH 300-115)

  •  Create a VLAN based verification plan
  • Configure switch-to-switch connectivity for the VLAN based solution
  • Configure loop prevention for the VLAN based solution
  • Configure Access Ports for the VLAN based solution
  • Verify the VLAN based solution was implemented properly using show and debug commands
  • Document the verification after implementing a VLAN solution
  • Determine network resources needed for implementing a Security solution
  • Create a implementation plan for the Security solution
  • Create a verification plan for the Security solution
  • Configure port security features
  • Configure general switch security features
  • Configure private VLANs
  • Configure VACL and PACL
  • Verify the Security based solution was implemented properly using show and debug commands
  • Document the verification results after implementing a Security solution
  • Determine network resources needed for implementing a Switch based Layer 3 solution
  • Create an implementation plan for the Switch based Layer 3 solution
  • Create a verification plan for the Switch based Layer 3 solution
  • Configure routing interfaces
  • Configure Layer 3 Security
  • Verify the Switch based Layer 3 solution was implemented properly using show and debug commands
  • Document the verification results after implementing a Switch based Layer 3 solution
  • Implement a Wireless Extension of a Layer 2 solution
  • Implement a VoIP support solution
  • Implement video support solution
  • Determine network resources needed for implementing High Availability on a network
  • Create a High Availability implementation plan
  • Create a High Availability verification plan
  • Implement first hop redundancy protocols
  • Implement switch supervisor redundancy
  • Verify High Availability solution was implemented properly using show and debug commands
  • Document results of High Availability implementation and verification

Key Topics: Designing Cisco Network Service Architecture – ARCH (300-320)

  • Identify the major desktop components and interfaces and their functions
  • Differentiate the characteristics of Windows 9x/Me, Windows NT 4.0 Workstation, Windows 2000 Professional and Windows XP
  • Identify the names, locations, purposes and contents of major system files
  • Demonstrate the ability to use command-line functions and utilities to manage the operating system, including the proper syntax and switches
  • Identify basic concepts and procedures for creating, viewing, and managing disks, directories and files
  • Identify the major operating system utilities, their purpose, location and available switches
  • Identify the procedures for installing Windows 9x/Me, Windows NT 4.0 Workstation, Windows 2000 Professional and Windows XP
  • Identify steps to perform an operating system upgrade from Windows 9.x/ME, Windows NT 4.0 Workstation, Windows 2000 Professional and Windows XP
  • Identify procedures for installing/adding a device, including loading, adding, and configuring device drivers and required software
  • Identify procedures necessary to optimize the operating system and major operating system subsystems
  • Recognize and interpret the meaning of common error codes and startup messages from the boot sequence and identify steps to correct the problems
  • Recognize when to use common diagnostic utilities and tools. Given a diagnostic scenario involving one of these utilities or tools, select the appropriate steps needed to resolve the problem
  • Recognize common operational and usability problems and determine how to resolve them
  • Identify the networking capabilities of Windows. Given configuration parameters, configure the operating system to connect to a network
  • Identify the basic Internet protocols and terminologies
  • Identify procedures for establishing Internet connectivity. In a given scenario, configure the operating system to connect to and use Internet resources

Learn More

  • This field is for validation purposes and should be left unchanged.

“We have helped thousands achieve Cisco Certifications, let us help you”

– Murad Tanvir, Double CCIE #17081
Founder and CEO Logitrain

What is included with the CCDP Course?

 

Includes 100% Pass Guarantee

Walk away with the certification. Included in full-time courses. Click here for more Info

Includes Career Counselling

Career Counselling is an integral part of job hunting, it is included with this course

Includes Trainer & Lab Support

6 month support with full-time courses, 3 month support with part-time courses

Includes Official Exam Fee

Take the certification exam within 3 months of course / module completion

Includes Mock & Test Questions

Mock tests included in full-time courses for 3 months from course completion

Includes Books & Meals

Course material in hardcopy included for you to keep. Full-time courses include meals

Includes Course Retake

Sit through the entire course again to clear any doubts. Included in full-time courses

Authorized VUE Test Center

Take the official vendor certification exam at the Logitrain training center

Upgrade Your Course Benefits

Add Pass Guarantee, extra support, retake in part-time course with a full-time fee

Our Price Beat Guarantee

We will beat competitor’s advertised price. Our course has no extra costs

Our Flexible Training Options

Attend classroom courses weekdays, weeknights, weekends or join from anywhere

Delivering Training Since 2004

There is no substitute for experience, we have trained 3000+ students. Train with the best

Attend Information Session

Make an informed decision. Get to know Logitrain before signing up. Visit us to learn about us and why we are the first choice for individuals, businesses and government departments.
  • This field is for validation purposes and should be left unchanged.

DATES, LOCATIONS & PRICES

CAN’T MAKE IT TO CLASS? GET CLASSROOM EXPERIENCE THROUGH OUR LIVE ONLINE TRAINING

LocationTypeDurationPriceDates
LocationTypeDurationPriceDates

Accreditations

OUR SATISFIED CUSTOMERS

Learn More

  • This field is for validation purposes and should be left unchanged.